Welcome to the adventures of shelf install in the kitchen! This post was almost titled “How to break an easy, no-explanation-necessary project down into several illustrated steps.”

As you can see I’m not very good at taking actual [right] before pictures. The above left image of the sink is almost 4 years old (I can’t believe we’ve been here that long!), and the image on the right is about 2 years old. But, they both serve to illustrate the shelving issues in the kitchen. By the sink, there isn’t a convenient, sturdy place to store soap. When the dish rack gets full it’s impossible to reach soap all the way over on the little counter to the right. By the stove, the shelf installed by a previous tenant is useless—anything placed there gets covered in grease and out of reach. In order to keep things at hand, they have to occupy space on the tiny counter space to the left of the stove. In the new configuration, this space become usable as a working countertop.

We’re all breathing easier without the nasty “look-at-me!” brackets of the old shelf, aren’t we?

I started this project Halloween weekend, first shopping for lumber and a mahogany-colored stain to match the existing un-painted wood in the kitchen. While our neighbors were applying glitter to their fairy wings, I was staining pine planks out back. Fortunately I managed to avoid getting any glitter stuck in the wet stain. This was my first time staining anything by myself, so I did my homework. Step 1: ask a random man in the stain aisle (no, not a store employee) if one should use a regular paint brush. The man will surely tell you that you’d be better off using a rag. It is best to use a rag to which you have no great attachment. Later, you will throw this rag in the trash because it will be impossible to clean; according to the label on the little tin of stain, it could even spontaneously catch fire if not disposed of properly. Step 2: phone your father (any knowledgeable, experienced stainer in the family will do) and share an in-depth discussion on the application of stain with said rag. He will go into detail about the instructions on the side of the stain can, placing emphasis on the importance of removing excess stain and avoiding drips for fear of an uneven finish. Step 3: don a pair of latex gloves, or similar, and get cracking. Allow the wood to dry over night.

Now that the wood is dry and you are satisfied with the color, it’s time to get out the tool box. You’ll want to mount the L-brackets before attempting to attach the shelf to the wall, unless you happen to be an octopus. For the shelf above the sink, the positioning of the brackets was based on the edge of the sink itself and the edge of the small counter below. In the case of the shelf by the stove, the brackets are evenly spaced from the ends of the board. As you decide where to place your brackets, a measuring tape and a pencil will come in handy. You might even consider putting a T-square on your Christmas list if you are lacking one as I am, wink! I placed the brackets against each piece of wood on the floor and used the floor to make sure they’d be flush to the wall. This step is based on the assumption that the floor and the wall are actually level—in my apartment they are not, but it’s close enough. Once the brackets were in position, I used a set of bar clamps to hold them in place while drilling.

The most important part of drilling is making sure not to go through the boards. You spent a lot of time staining them, remember? As I learned from Rod, the easiest way to do this is to wrap a small piece of tape around your drill bit that indicates how deep you want the bit to sink.

With the brackets in place, it’s time to mount the shelf on the wall. You’ll need a level and your pencil again. Since I have only 2 hands (again, I’m a human—not an octopus), I don’t have any pictures of this part. Taking a tip from Anna of Door Sixteen, I painted out the bottom half of the brackets so the shelves would appear to float.

Now that the shelves are in place, it’s time to put them to work. Give them a purpose, make them feel wanted, and make sure they feel pretty. As I said, the main role for the shelf above the sink was to give us a solid place to store soap. But, as you can see in the above images, there’s room for a bit more than that. I read recently that all decorating is part function, part display. I was thinking 100% display with everything that came after the dishsoap, but it turns out this open storage is also highly functional. Tom and I are actually using these pieces now that they’re within arm’s reach. That, of course means our pretty bowls feel useful again and these shelves feel pretty useful—esteemed, even.

Special thanks to the man in the stain aisle, my father, and Tom for contributing a second set of hands.

Juicy Salif Squeezer by Alessi, Kiwi watering can by Alessi, Bread Bag by Stelton, Salad Plant by Black + Blum. Images: http://www.emmohome.com/

p.s. They also carry the Cycloc Bike Rack by IC Design Group (featured here previously).

I’ve read a lot about “IKEA hacks” online but I’ve never attempted one myself. In fact, it’s probably still true that I still haven’t. I had help (the hands you see in the pictures below are my friend Rod’s), and it was more of a careful edit than a hack. Last month I came home with two Frösta stools from IKEA. Though I liked the shape, I was dubious about their quality, considering past experience with IKEA’s wooden chairs (background: Tom bought four Ivar chairs for his apartment while we were still in college. We used them at our dining table here in Minneapolis [see left] until one collapsed under him when we had friends over for dinner last fall… we were able to return them as IKEA’s staff determined they were defective… since then we’ve been using two blue Steelcase chairs I got for $10 each at the University of Minnesota Reuse Center). I brought the Fröstas home with the idea of test driving one; I left the other in its packaging to make for an easy return if necessary. My hope was that they’d make for great extra seating when we have guests, but my hesitations proved correct. With four legs, the stool was really wobbly. And, even though I had tightened the screws really well, the individual legs wiggled badly. With a 90-day return policy ahead of me, I decided to hang onto the stools until it made sense to make the drive out to IKEA again.

The stool and its still-packaged partner sat in the corner of our dining space until I read this post at Door Sixteen. Anna at Door Sixteen has a great eye, and this time she featured several Artek designs, the company Alvar Aalto, his wife Aino, and two others founded in 1935 (Artek meaning Art + Technology). Many of IKEA’s designs are inspired by Modernist classics, but I didn’t know of Frösta’s “inspiration” until I read Anna’s post. It’s pretty clear (Left: Frösta, Right: Aalto 60):

Frösta is made of Birch, just as the 1933 Aalto 60 is; it’s the finish on the Swedish-Chinese stool that makes it differ from the Finnish one as well as the height. Frösta is just a bit taller than the Artek stool. And the price… we can’t forget about the price. When she learned about my project, Anna from D16 pointed out that Aalto also designed 4-legged versions of the stool (the E60) and asked if I might be tempted to leave them as-is. The wobbles were driving me nuts, though, and I kept thinking back to math class: 3 points make a plane! With 3 legs instead of 4, I expected to reduce the wobbles significantly. Then the idea of glue arose as a solution to the wiggles. This is where my friend Rod came in…

Once decided, I asked Rod if he wouldn’t mind helping me make the change, and he very graciously said yes, telling me to bring the stools to him straight away the following day. After seeing the images of the Aalto 60, Rod agreed it would be an improvement to lose a leg on each stool and quickly went to work. First he measured and marked each stool’s seat, using one set of original holes to guide him. We didn’t measure out 120° angles, instead Rod estimated it would end up being about one foot between the points. This turned out to be almost dead-on. With a 1/16th of an inch adjustment we had evenly balanced lines. Next he created the holes. To control the depth of the drill, Rod attached a piece of black tape around his bit to avoid going through the stool’s seat (you can see it in the picture below left). Clever, no?

Once the new holes were finished, it was time to attach the legs. Rod added some Gorilla Glue before attaching the screws to make sure they’d really hold.

The verdict: three legs are better than four. This was a major improvement. Thanks to Rod!

This is a shot of our sink when we first moved in. Totally pristine.

Today I took down something I’d hung (I use the word hung loosely… in this case there was packing tape involved) in the kitchen and breathed a sigh of relief. Yes. It DID look better without that there. Tom’s take? “No comment.” This time, I could take it. I agreed.

A picture of the rice sack-like hanging in place…

Now for the sigh of relief…

As for the pot rack? So far I’m not looking back on that one. Hopefully I’ll have more to share about the sink soon… it was recently featured on Apartment Therapy Boston’s “Good Questions” as I’m working on a sink skirt and needed some advice. You’ll hear about it as soon as I find some suitable fabric!

Solig paper napkins, $0.99—$1.99

Dyning hammock in assorted colors, $29.99

I’m interested to see what the Dyning hammock is like in person. For its price, it would be lovely if it were light and squished up small so as to be camping-friendly.

And the trays! There are several new trays also part of the Solig line; the price is right too. We have one tray at home with a great black and white striped pattern, a gift from Sarah, that makes for fun food presentation. Perhaps it wouldn’t be so bad to have a couple more?

Solig trays: Left, $7.99; Right, $4.99 each

Lastly, I almost forgot, there are new bags. I still like my ’05 beach bag best… mostly because it was purchased at IKEA Florence and because it’s just generally awesome, but these are pretty great patterns too. Below are the Solig gardening bags in three colors at $2.49 each and the new Solig beach bags at $1.49 each. This is why IKEA=Love.

All images: http://www.ikea.com/us/en

**Update: If you’d like to see the catalog pages check out AT’s “sneak peek” of the summer line.